Announce
In the office
Telephone systems, VoIP Solutions
Out of the office
Business VoIP remote solutions
On the internet
Out & In Door Wi Fi & Networked Solutions
2.4G & 5.0G Mesh Network Systems*
Super Range Cordless phones* 2km
Public address systems
Audio Solutions. Back ground music. Voice evacuation
Contact & Services
customer billing | office login
Call T 028 90 99 65 81
|||| announce | deploying next generation technologies today
Speakers
Paging Controls
Talkback Intercoms
Accessories
UTP Clocks
Analog
Housing Digital Clocks
Clocks- Speaker Baffles
Wire Guards
Information
Customer Information
Login
Register
Valcom
Valcom V-2924A
GENERAL INFORMATION
The V-2924A provides 24 stations of handsfree intercom with one-way group call and all call. Up to three expansion units may be connected to provide 48, 72, or 96 zones of paging with handsfree reply, up to 16 one-way page groups, and all call. The system also provides the ability for a remote speaker location equipped with a call button to call the attendant location.
Interfaces With Telephone System Via A Loop Start C.O. Line Position
Features A Built-in 30 Hz 90 V Ring Generator
Distinctive Ringing Option
May Be Accessed From Dedicated Single Line Telephone(s)
Standard 66 Blocks Used For Connections
Provides 24 Zones Of Handsfree Talkback And/Or 1 Way Paging
Can Easily Be Expanded To Up To 96 Zones Of Handsfree Paging
(with V-2925A Expansion Unit)
Group Pages
Programmable Architectural Numbering Available
Caller ID Capable
One Way All Call With Meet Me And Follow Me Capability
"Call-In" From Speaker Locations
Multiple Incoming Calls Placed In Queue
Call Waiting Notification
DTMF Operated Auxiliary Contacts Available For Controlling Electric Door Locks
Background Music Input
Dial Tone
Ringback Tone
Optional Alert/Repeated Alert Tone
Accepts DTMF Dialing
Integral Battery Backup Input
Standard AC Receptacle Powered
Compatible With All Valcom One Way Or Talkback Speakers
SMDR Output
Inhibit
Integral Tone Generator
ACCESS: Page Port, PABX Loop-Start Trunk Port, Electronic or 1A2 Line Key (line card required), or Dedicated Single Line Phone Set
Specifications: Input Impedance: 600 ohm; Music Source Impedance: 10 k ohms; Music Input Level: -10 dBm nominal; Output Level: 45 ohm; Power Requirements: 120/240 Vac, 1.5 Amp, 50/60 Hz
Weight: 18 lbs
Dimensions: Control Unit:19"H x 10-3/4"W x 3-3/8"D
Expansion Unit:19"H x 8-3/4"W x 3-3/8"D
Valcom
Valcom V-2925A
GENERAL INFORMATION
The V-2924A provides 24 stations of handsfree intercom with one-way group call and all call. Up to three expansion units may be connected to provide 48, 72, or 96 zones of paging with handsfree reply, up to 16 one-way page groups, and all call. The system also provides the ability for a remote speaker location equipped with a call button to call the attendant location.
Interfaces With Telephone System Via A Loop Start C.O. Line Position
Features A Built-in 30 Hz 90 V Ring Generator
Distinctive Ringing Option
May Be Accessed From Dedicated Single Line Telephone(s)
Standard 66 Blocks Used For Connections
Provides 24 Zones Of Handsfree Talkback And/Or 1 Way Paging
Can Easily Be Expanded To Up To 96 Zones Of Handsfree Paging
(with V-2925A Expansion Unit)
Group Pages
Programmable Architectural Numbering Available
Caller ID Capable
One Way All Call With Meet Me And Follow Me Capability
"Call-In" From Speaker Locations
Multiple Incoming Calls Placed In Queue
Call Waiting Notification
DTMF Operated Auxiliary Contacts Available For Controlling Electric Door Locks
Background Music Input
Dial Tone
Ringback Tone
Optional Alert/Repeated Alert Tone
Accepts DTMF Dialing
Integral Battery Backup Input
Standard AC Receptacle Powered
Compatible With All Valcom One Way Or Talkback Speakers
SMDR Output
Inhibit
Integral Tone Generator
ACCESS: Page Port, PABX Loop-Start Trunk Port, Electronic or 1A2 Line Key (line card required), or Dedicated Single Line Phone Set
Specifications: Input Impedance: 600 ohm; Music Source Impedance: 10 k ohms; Music Input Level: -10 dBm nominal; Output Level: 45 ohm; Power Requirements: 120/240 Vac, 1.5 Amp, 50/60 Hz
Weight: 18 lbs
Dimensions: Control Unit:19"H x 10-3/4"W x 3-3/8"D
Expansion Unit:19"H x 8-3/4"W x 3-3/8"D
